Trouble shooting

Baiardo will not turn on

Check that machine is plugged into wall outlet

Checkthat power supply is fully connected and LED on power supply is solid green

Remove electronics box and check that all 3 connections are made

Baiardo is running in the wrong language

Reset language (see page 5 of the manual)

Touch screen appears dark/hard to read

Touch screen to activate backlight. This is an energy saving feature

Baiardo is not stable

Move the machine to level surface

Adjust leveling screws in floor plate

String slips through puller

Adjust puller (see page 9 of manual)

Clean inner surface of puller to remove build-up of lubrication from string

String tension seems lower than normal

Check that string is not slipping through clamps

Calibrate machine (see page 26 of manual)

Clamps leave white marks on string

This is normal on some multifilament strings

Clean and adjust clamps to slightest pressure that still grabs string

Be sure to adjust clampsl for different diameters of string

The power cord is lost

The cord form the power brick to the wally is a standard cord used on many electronic devices such as computer, projectors, etc.

A replacment can be found at many electronic stores

An error code is displayed on the screen

Turn off the machine, wait several minutes and restart

Turn off. Check all connection from base to top (2 wires). Remove ECU box and check all connections (3 wires), replace electronics box and restart

Call Wilson. Be sure to have noted the number of the error code